I would like to replace carpet. Does the slide ,LR, need to be removed? It is a raised slide.Got an estimate from one person, he wanted $1400., labor because it would take three hrs., at 90.00 per hr. to remove, replace slide.Anyone done this without...
I am unable to put slide out. The switch gets power with the in pushed, but nothing when out is pushed. I have bypassed the switch. has power to in side , none on out.Have checked all fuses in main fuse panel, all are hot.Is there something I am miss...
This is a follow up question.5BGE gas powered (2000 Damon Intruder. Have replaced fuel pump and filter, but still shuts off when switch is released. Oil level is full, battery is fully charged. Full tank fresh fuel. It runs until the switch is rel...
Does the fuel tank need to be dropped, to replace Genset fuel line?If not, would like information how to do it. If so tips on how to drop tank.Damon, Intruder, 2000,Any help would be a lot of help.Thanks, Chucl
I had the same problem. It turned out to be the race bearing, be tween the seat and pedestal/Tighten the bolt first, if not that check the bearing.Chuck
Thanks for all the help. Keep them coming.I went back to look at the estimate, it was 8 hrs. not 3.either way a lot of labor cost If it can be done without removing.Chuck
Well I took the rig to Craig's, generator shop,in Pensacola, FL.Had to replace voltage reg., and cleaned the slip ring.If in this area Craig's is the place to go. When he showed me the slip ring I though he would tell me it would require removal and ...
