If I wanted to lower the front end of my 5th wheel, which would be preferred, lower the hitch in the bed or raise the kingpin on the trailer or does it even matter? If thinking lowering the hitch in the bed would put the kingpin lower and closer to ...
Need some quick advice please. Set up yesterday and everything was fine. Woke up this am to the Co detector chirping. Realized I didn’t have any lights. Looked around and unit is dead. I have power at the pole confirmed by my power watchdog. My inver...
Does cooler weather typically effect hydraulics operation. Winterized my unit last week and when I tried to close the main slides (hydraulic operated) they would move about 6" and stop and the touch screen would say "Fault occurred" I could release t...
So I'm new to tankless WH in an RV. When you winterize do you store them with antifreeze in the lines or can you effectively drain and blow them out? When I bought the unit during the PDI I was told to always put antifreeze in it because there is no...
The pin really isn't holding any weight. I towed an 8,000Lb tractor on a flatbed trailer about 60 miles once and after the trip I realized I never put the pin into the hitch. Won't do that again but that taught me the pin isn't doing any work.
Cummins12V98 wrote:If you have not owned the RV long just wait they mysteriously gain weight.So true in many cases and it’s easy to do but the wife and I always try to stay with minimal stuff. If it doesn’t get used at least once every few trips it’s...
