ljr869
Explorer
Joined 17 years ago
User Profile
User Widgets
All Activity
Backup camera screen trouble
What would cause my backup camera screen to do this? I'm thinking possibly a loose connection. The top of the picture is displayed at the bottom. It eventually goes back to normal though. /Users/ljr869/Pictures/Photos Library.photoslibrary/resources/proxies/derivatives/4a/00/4af4/UNADJUSTEDNONRAW_thumb_4af4.jpg450Views0likes0CommentsStay-a-While cracked
Smelled gas and ran my finger around the joints, assuming that's where the leak was. Turned the valve off and then saw the spray come out from a crack adjacent to the 1/4" supplemental connection on the body of the stay-a-while. Probably from 9 years of bouncing around but assumed it would last much longer.2.1KViews0likes6Comments- 9.7KViews0likes0Comments
Re: The dreaded code 36
It's air-cooled by the way. I did buy a replacement fuel pump (Airtex) as well as an Onan tune-up kit, the fuel and air filters of which I've used. I figured if the fuel pump works while priming, which it does, then it works. It's odd that temperature would be a factor. I'll read up on replacement procedure and see if I can tackle it as I do have good access to the underside.9.6KViews0likes0CommentsThe dreaded code 36
Onan Marquis Gold 5500 runs for 3 to 10 minutes then surges and dies. Code 36 means it shut down without being told to. Plenty of clean fuel, just changed fuel filter, pump primes, clean air filter, proper oil level. I'm guessing it's carburetor related seeing as it occurs once it gets to operating temp. That's a bit above my expertise so into the shop it goes.17KViews0likes14Comments
Groups
Motorhome Group
Join in here to discuss all things motorhomes.Feb 13, 202538,707 Posts
