dangerruss
Explorer
Joined 9 years ago
User Profile
User Widgets
All Activity
Vent Control
Trying to track down a vacuum leak that is causing the vents to default to the defrost position. I have good vacuum inside the engine compartment. I am ready to move onto the next step but need some help. I found where the vacuum line comes through the firewall. I proceeds to connect to a manifold of some type. I want to remove the black line from the bottom of this manifold to see if I have good vacuum or not but, I am not sure how to remove it. I hate to make the problem worse by breaking something. Any clues on how to remove the black line? Below is a link to some pictures.https://imgur.com/a/UFcRa Thanks, Russ2.5KViews0likes9CommentsRe: Wiring Damage
You are not looking at the problem correctly. See the copper wire splayed out. If you look closely at the picture, it used to have insulation on it and it connected to the wire at the top right that appears to be cut. It is 14 gage wire almost like a lamp cord..396Views0likes0CommentsWiring Damage
Our dog decided to protect our motorhome from critters and tore up this area behind the front passenger tire. I have no problem repairing the wiring, but I am curious to what this wiring goes to or what function it serves. Any ideas? Everything seems to be working ok... Thanks in advance... Russell1.4KViews0likes8CommentsSlide Out Adjustment Help!
I can see from the inside of my Gulfstream Conquest travel trailer that the slide out is listing to the right by about 3/4 of an inch. Is there some sort of adjustment to bring the right side of the slide to be the same as the left side? The picture is my Gulfstream motor home and not my travel trailer incase anyone gets confused.. Thanks, Russ1.7KViews0likes5Comments
Groups
Motorhome Group
Join in here to discuss all things motorhomes.Jan 14, 202538,705 Posts Travel Trailer Group
Prefer to camp in a travel trailer? You're not alone.Jan 13, 202544,029 Posts
