Hulkjoegan
Explorer
Joined 6 years ago
User Profile
User Widgets
All Activity
Re: Onan 4kw issue
So....in the first junction box I disconnected the lines from the Genset to the transfer switch, ohmed between the hot and neutral to the transfer switch and got around 300ohms, sounds right, started the genny and the breaker still tripped. I went further back and disconnected the out from the 30a breaker and it still tripped itself.631Views0likes0CommentsRe: Onan 4kw issue
So I have chased all lines from the genny to the transfer switch, undid and inspected all wire nut connections, tightened all ground connections and found nothing. The transfer switch appears fine and I manually forced the mechanism back and forth multiple times to make sure it wasn’t welded. Still having them same issue of the 30A breaker on the genny kicking. Now while I’ve been working on this, I’ve been running the generator a lot, and it seems that as the day has gone on, it’s gone from kicking the breaker nearly instantly last night to almost 20 secs to kick it now. Is there some kind of feedback loop that’ll kick that breaker?631Views0likes0Comments- 277Views0likes0Comments
- 276Views0likes0Comments
Re: Onan 4kw issue
Did some digging and chased the wiring across the chassis where it comes up through the floor on the opposite side of the rv, it ends there, somebody pulled it apart and there’s a switch that’s completely unwired. Any ideas or a schematic? No other loose wires beyond the four coming from the generator276Views0likes0CommentsOnan 4kw issue
New RV owner here, just purchased a 97 Coachman Leprechaun with a 4kw Onan genny, generator starts and runs fine, but the 30A breaker on the genny stays kicked. I have all the breakers in the rv turned off and when I turn the 30A on it kicks within 5 secs. Any help would be much appreciated3.2KViews0likes30Comments
Groups
