Parts for 8500 slide topper
A&E system. Rods that go thru springs broke and end caps are egg shaped. Think they would have addressed the egg shaped issue because almost all failures shows caps getting wore out and binding slide topper getting pulled or ripped out of slide. No repair parts available so you just throw a $700.00 dollar piece away and purchase a $900.00 plus slide topper. Guess they engineered a way of "Repeat" business
Slide Controller override switch replace?
The rubber / plastic button actuator on my Schwintek / Lippert slide controller was knocked off. I want to replace the switch indicated by the red circle. Has anybody done this? What switch did you use? I found one on Amazon that looks the same and is about the right size 6x6x5mm. I don't want to spend 100s on a new controller because this one works except for the button.
Mushy Floor
So I have a 2016 Jayco and under the large slide out, the flooring has become soft under the linoleum flooring at one end of the slide. Does anyone have any background in how to repair this? Who to take it to that is not going to kill my bank? I just don’t want it to get any worse than it is.
Northwoods Foxmountain Slide Out
This Northwoods Foxmountain Slide Out design just can't be right. The manufacturer wouldn't fix it and sent me to a dealer. Bish RV (dealer) said it was designed this way and they wouldn't fix it. The top comes in first and then the bottom will come in causing the upper trim to bend. Can't find any schematics. Need someone familiar with this.
Slide out bound up
Please help!!! We moved our 1997 Fleetwood wilderness after starting in one place for 6 months. She gave us a little trouble bringing in the slide. We had to use a jack under the slide to wiggle her in. When we got to our new spot we tried to extend the slide and the bottom didn't move. We checked underneath and found nothing out of order. Then we noticed the floor if the slide on the inside. The corners are extended upwards and the middle is flush with the floor. We think the slide jumped off the tracks due to the new gap on the side. Can anyone please guide me on what to do next? we are still fairly new at living in our trailer. We're remodeling and living in it at the same time so please excuse the mess.
