Adding a valve on the toilet?
The toilet in my camper uses a lot of water every time we flush. We typically camp at state parks without a sewer connection, and the black tank gets full quickly because of the large amount of water...
Forum Discussion
BarneyS wrote:
I don't see how a valve in the water line would help you at all. The amount of water per flush is determined by how much you put in the bowl to begin with and how long you hold down the flush pedal. Once you let up on it or release the hand valve, if that is what you have, then the water flowing into the tank stops. You do have an RV toilet in your rig don't you?
By the way, with RV's, more water is better. :)
Barney
X2!
RV toilets you control the amount of H2O that is used for the flush, if you did a #1, just enough to rinse the bowl, if #2 fill the bowl, so you don't get a poo pyramid!
If you are trusting the level gauge, check it right after emptying as it likely still reads full! :h
