Adding a valve on the toilet?
The toilet in my camper uses a lot of water every time we flush. We typically camp at state parks without a sewer connection, and the black tank gets full quickly because of the large amount of water...
Forum Discussion
Just to clarify, this is our second camper. My first camper and this one both have 30 gallon black tanks. I never trust the sensors to tell if it is full. I shine a flash light down the toilet to tell. We're a family of four. My last camper, we could go around 8 or 9 days before the black tank would get full. This camper is about 4 days. Exact same toilet usage practices, and yes, I make sure I have a full black tank before dumping it. The difference is that for the quick moment that you press the pedal, a tremendous amount of water goes through the toilet, whereas only a small amount went through on my old camper. And yes, I'm using a pressure regulator on the park water spigot before it comes into the camper. Basically, I want to dial down the amount of water that goes into the toilet so that it behaves like the toilet in my old camper. I hope this makes sense.
