Adding a valve on the toilet?
The toilet in my camper uses a lot of water every time we flush. We typically camp at state parks without a sewer connection, and the black tank gets full quickly because of the large amount of water...
Forum Discussion
BarneyS wrote:
The amount of water per flush is determined by how much you put in the bowl to begin with and how long you hold down the flush pedal.
That would be my assumption too......but it might not be correct in his case.
If his toilet is a different design so that he can NOT control the amount of water in a flush......then replacing the toilet with a different model might be the best solution. And not all that expensive either.
