adding mounting board to exterior of rv?
Just purchased a new Ice Castle fish house; the style with the fiberglass exterior so pretty much the same as a regular rv. We added 12 volt drops high on the exterior so that we can install led li...
Forum Discussion
I think I have a plan
going to go with something similar to a stern saver http://bassanglerhq.com/blog/gear/first-ever-glue-on-transducer-mount
So 3M 5200 adhesive and some uhmw with a few drilled out cups to hold the adhesive. Then do stainless hardware through the uhmw from the backside to another block of uhmw which i'll go through the backside of to hold the light bars. Then if the light bars fail or need to be replaced or whatever and I can't get the same footprint I can just toss the top uhmw plate and start over.
going to go with something similar to a stern saver http://bassanglerhq.com/blog/gear/first-ever-glue-on-transducer-mount
So 3M 5200 adhesive and some uhmw with a few drilled out cups to hold the adhesive. Then do stainless hardware through the uhmw from the backside to another block of uhmw which i'll go through the backside of to hold the light bars. Then if the light bars fail or need to be replaced or whatever and I can't get the same footprint I can just toss the top uhmw plate and start over.
