Anyone drill thru a corian counter top
I want to install a dish soap dispenser and need to drill a 1" hole thru the counter top. I have the location picked out,plenty of clearance, but just to scared to do it. Anyone have any tips, tricks ...
Forum Discussion
Tom_M wrote:Cummins12V98 wrote:Tom_M wrote:Cummins12V98 wrote:
Forstner bit is designed for a drill press. Unless you clamp a board down with a hole in it the forstner can and probably will walk on you. Hole saw!
I've had no problems using a Forstner bit in a hand drill. I installed a sink and stovetop recently in my coach and used a Forstner bit to drill through my solid surface countertop. It may walk if trying to drill a deep hole but otherwise no problem.
Are you talking the one with a small point in the center or the screw point in the center?
This one:
You are a brave one TomM
