Progressive Industies EMS-HW50C Install
So since I had the day off, I thought I would do some mods. I was going to replace the MaXxAir roof vent with a MaXxAir II that is silver. But when I was removing the original one, I saw they screwed ...
Forum Discussion
I had the same thought,running the wire to the inside would be a chore and I didn't think I would like a box flashing inside all the time,especially at night.
But I wanted to mount the EMS inside of my electrical bay.So this is what I did,I attached the remote to the inside of electrical bay door using industrial strength Velcro. That way I can see it when hooking up and if anything goes wrong I can open the door and read the codes.
Worked out very well.
But I wanted to mount the EMS inside of my electrical bay.So this is what I did,I attached the remote to the inside of electrical bay door using industrial strength Velcro. That way I can see it when hooking up and if anything goes wrong I can open the door and read the codes.
Worked out very well.
