wrgrs50s wrote:
The only other option is to gob grease on the 5th wheel which is really messy.
Halmfamily wrote:
On our second one, killed our first one when it slid down a little and I didn't notice until I nearly bent it in half while hooking uo.
Durb wrote:
Most lube plates are 1/4" thick. They do make 1/8" thick plates if needed. In my mind they are a lot better than dealing with grease, certainly cleaner.
Cummins12V98 wrote:Halmfamily wrote:
On our second one, killed our first one when it slid down a little and I didn't notice until I nearly bent it in half while hooking uo.
Easy fix if it does not stay up in place. Lay on hard surface. Hit the edges of the hole with a hammer. This will decrease the diamiter and make the plate stay in place.
