Dave H M wrote:
Charlie D. wrote:
Burner had a dirt dauber nest on the end.
I been to that school also.
If you haven't done it yesterday, one of those clip on stainless screens will cure that for the future.
Yep. Have always kept them in place but the the spring that held it on broke and I never got around to repairing. Now have it wired in place.
As a side note: After cleaning and reassembling I found that it would ignite and heat sporadically. Stove would light and had good flame. Later found that propane tank was about 15% full. Appears that that was not enough to keep heater fully functioning. Something to remember. A full tank solved that problem.