lost the clearance lights
We plugged in and checked the lights (we check everyday before heading out), and all was good. Well, later on, the tail light/clearance lights were out. Turn and brake lights were fine. After checki...
Forum Discussion
bucky wrote:Corrosion just causes the lights not to work, not blow the fuse. The OP has to have the wire grounded for the clearance lights. You'll have to trace the wire to find where it's grounded.
Wiggle the heck out of the 5er connection at the truck first. Gremlins can appear with the slightest bit of corrosion in the female receptacle.
