slide-out switch nightmare
I have a 2005 Keystone Challenger 34TLB, w/3 slides. There is only one switch for the slides, you must extend/retract them ALL, in a prescribed sequence, to move (any of) :@them. I wish I had a sing...
Forum Discussion
There is probably a control board somewhere that handles the sequencing of all three of those slides. Finding it and figuring out how to bypass it with individual switches probably requires a little knowledge of electronics and being able to read the schematic if there even is a schematic.
Jerry Parr
Probably limit switches are also involved to help control the sequencing.
If I were you I would try to find out who the manufacture of that control system is not the RV manufacture but the people that actually made the control system and get a hold of them and ask them how you can add some individual switches to that system and maybe get a schematic from them.
Jerry Parr
Probably limit switches are also involved to help control the sequencing.
If I were you I would try to find out who the manufacture of that control system is not the RV manufacture but the people that actually made the control system and get a hold of them and ask them how you can add some individual switches to that system and maybe get a schematic from them.
