Trailer Wiring - Added Side Turn Signals
I installed a set of LED turn signals on each side of the trailer, so that when a car is driving alongside, and I wish to change lanes, they can see the signal. The output from the truck (2012 Dodge ...
Forum Discussion
45Ricochet wrote:
Search member "Mile high" and send him (Brad) a PM. I remember him doing it and he started a thread about it but it was years ago and I've forgotten what he did.
Thanks for remembering Rick!
I replaced the forward side markers on my Montana with trucker mid-turn lights (both marker and turn lights). To prevent the mid turn lights from coming on with the brakes, I used a Drawtite 118158 which looks the same as CAddy's Curt version. I just "T" tapped the turn lights on the harness up by the batteries and fed the midturn lights off this. No change to the taillight wiring. This adapter senses when both left and right sides come on with the brake lights, and cancels output to the midturn lights.
Those things really worked for moving traffic! As soon as I get brave enough to drill into the paint on this new rig, I'll install then on this Redwood too, but probably LED.
