Trojan T105 Batteries - Need a charger
I just replaced my 12V batteries for 2 6v T105 225AmpHour deep cycle batteries run in series to make 12v. I have a schumacher charger that does 2/6/8 Amps. It takes forever to charge! The battery v...
Forum Discussion
Sorry to jump in late on this discussion ...
Trojan clear states on page 16 of their User Guide that the
Table 4 of the same document states that 12V batteries should be charged at 14.82V, 7.41V for 6V (T105) batteries.
I have not found a "smart"/multi-stage charger that charges at this high of a voltage !
The rest of the voltages in Table 4 are higher than most (all?) mutli-stage chargers, certainly higher than the Charge Wizard.
Do any of you with Trojan batteries using Progressive Dynamics chargers have any issues ?
Trojan clear states on page 16 of their User Guide that the
the recommended boost charge voltage is 2.45 - 2.58 V/cell with the charger output current limited to 3 - 5% of C??.
Table 4 of the same document states that 12V batteries should be charged at 14.82V, 7.41V for 6V (T105) batteries.
I have not found a "smart"/multi-stage charger that charges at this high of a voltage !
The rest of the voltages in Table 4 are higher than most (all?) mutli-stage chargers, certainly higher than the Charge Wizard.
Do any of you with Trojan batteries using Progressive Dynamics chargers have any issues ?
