Wiring in portable generator
I am purchasing a 3300 watt portable genset. The genset will remain in the bed of the truck. Instead of running a long 30 amp extension to the rear of the trailer, how else can I set the system up. Ca...
Forum Discussion
I found the transfer switch finally. It was located (hidden) behind a furnace duct. Now the question is: the genset is 120 vac single phase and the RV is 50 amps . The factory hookup going to the transfer switch is 8ga white, black and red wires. Do I hook up the gensets single hot black wire to both the red and black wires so the split power panel will both receive 120Vs. Thanks.
