12v fuse board
Hi,
New to the forum hello all glad to be here.
I'll get right to the problem.
I have a fleetwood ralley year 2000 . I replaced the bottom of the magnitek 6300 series converter with a WFCO WF-8935-MBA 35 Amp Main Board Assembly.
The reason I switched is because the Mag was not charging batteries and 5 of the 8 fuses had 17v on them. Now I installed the wfco and now 5 of the 8 have .06 v which is nothing. the three that work have proper 13.6v Can't figure this out. This is when pluged into 30amp service.
New to the forum hello all glad to be here.
I'll get right to the problem.
I have a fleetwood ralley year 2000 . I replaced the bottom of the magnitek 6300 series converter with a WFCO WF-8935-MBA 35 Amp Main Board Assembly.
The reason I switched is because the Mag was not charging batteries and 5 of the 8 fuses had 17v on them. Now I installed the wfco and now 5 of the 8 have .06 v which is nothing. the three that work have proper 13.6v Can't figure this out. This is when pluged into 30amp service.
