1992 itasca sunrise
My motorhome has front air bags in the springs . last year they were sealed . This year neither one will hold air leaking out of bag itself. Now I drove it with no air and it rides fine infact seems b...
Forum Discussion
Gjac wrote:
I would check the ride height between the upper a arm and the rubber bumper below. If the lower part of the a arm is shiny it is a good indication the the ride height is low and the lower bumper is banging or resting on the lower section of the a arm. Clay posted the manual that shows a nice picture of this. If memory serves me the ride height should be 1 3/4 in. If you have the proper gap I would just realign the front end.
I will check it out tomorrow thanks again for the info I will let everyone know my findings... This a great forum .
Itasca55
