99 F53 rear brake rotors
I need to replace the rear rotors on my 99 Southwind V10 F53 chassis. Has anyone done a "99"? Some say you need to pull the axil and some say you don't. I know it'll be obvious when I get into it, b...
Forum Discussion
I miss read. Been a while since I had this apart. Here are the step for my 99.
Removal
1. Remove the tire and wheel assembly.
2. Remove the anchor plate.
3. Remove the axle shaft .
4. Using a suitable socket, remove the hub nut.
6. Remove the outer rear wheel bearing.
7. Remove the rear hub and brake disc assembly.
8. Remove the bolts and separate the rear hub from the rear brake disc.
Removal
1. Remove the tire and wheel assembly.
2. Remove the anchor plate.
3. Remove the axle shaft .
4. Using a suitable socket, remove the hub nut.
6. Remove the outer rear wheel bearing.
7. Remove the rear hub and brake disc assembly.
8. Remove the bolts and separate the rear hub from the rear brake disc.
