campground leveling
How do the Lynx and Camco plastic levels work for a Lazy Daze with duals work for leveling. Thanks John
Forum Discussion
We Cant Wait wrote:
Went to Home Depot and bought a couple of 2x10x12' and cut the following lengths out of each one, 2-1', 2-2', and 2-3', set the saw to cut at a 45 degree to create a ramp effect on each one, and then can stack them as needed to get a total of 6" rise to help level the MH.
That's almost what I did.
Except I screwed three different length pieces together of 2X8's to make a stair-step ramp block that I can drive up onto for three different lift heights - 1 1/2 inches up, 3 inches up, and 4 1/2 inches up. I made five of these so I can have four blocks under both rear dual tire sets and one under one front tire for the worst-case situation of needing a 3-point leveling arrangement requiring a complete lift in the rear and a lift in one front.
For sure, those plastic lift blocks would not hold-up in situations/places like this:
