I know you will be happy that I went with 315/80/22.5 on the front of my MH. They are FS400 and I like them a lot. They do have a high pitch whine at 45 that goes away at higher speeds. Since I did not need the weight carrying of a 295 on the rear 6 tires I went with Hankook 11R22.5 which I had to increase the pressure from 85 to 95 to equal the load carrying. For those that bash Firestone/Exploder much of the problem was too little air pressure by Ford. On my rubber tired loaders I had the best luck with Firestone where you put most of the weight of the machine on the front two tires. Learned to run Firestone on the front and whatever else I had on the rear.