genset will not start from remote switches
I have a Kohler 5ckm21 genset it will start from the switch on the genset itself but not from the switch above the stove or the dash board. When the genset is running the light come on the switch on t...
Forum Discussion
Checked the plug connection at the control board as Doug suggested connection looked clean but still cleaned the female portion out any ways, still no start. Wires looked good as far back to the top of the gas tank where I lost them. Still no start from the remote switches. I ohmed out the wires from the plug that connects to the control board to the splices in the wires that go forward to the remote switches and had continuity. I will put in new splice connections just to be sure they can pass amps through the connections and see if that fixes the problem.
