HELP!! No 12V or 110V power
Well, everything was going fine.....plugged into shore power at my home. All lights worked, AC ran, all good. THEN...... I started generator while still plugged into shore power. AC, lights, a...
Forum Discussion
Baja Man wrote:
1. Where are generator fuses?
ON THE GEN CONTROL PANEL OR NEAR OUTPUT CABLE
2. The transfer switch has two 30amp blade fuses. I thought these blade fuses were for 12 Volts....seems odd on a transfer switch.
Don't know of a 120V AC auto transfer switch with 30A fuses ??
How many power cords are connected to this device with the 30A fuses?
For a 120V AC ATS there would be ONE from shore power cord, ONE from Generator and ONE going out to MAIN AC PANEL
30A Fuses on a ATS :H
30A ATS
Converter has 30A 'reverse Polarity' fuses for battery/converter protection.
Converter with 30A 'Reverse Polarity' fuses
