HWH Jack switch
I have an HWH 200 series jack system with the joy sticks. This last trip I had a hard time pushing the switch to the ON position. I remove the face plate and played with the switch and springs to get ...
Forum Discussion
Just to conclude this thread in case anyone else has to replace this switch. I could not find the exact switch, but found one that was close, when I inserted it the leads contacted the rear joy stick beneath the face plate blowing the 5 amp fuse. I reversed the switch so the two leads would clear the metal joy stick and all is well again. With the switch being reversed I had to cover the on off on the face plate with black tape and use the I O on the switch.
