Wolfe,
I used a volt meter checked at the input side from the AC power chord and I had 110 at the leg going in. The opposite side had 110 as well.
The jumpers to the bottom black box were live as well. On the far right side to the box nothing.
When I tested with the Gen set I had the 220 entering on the bottom black box and 220 out on the opposite side.
As you mentioned I did check all the connections before I did the volt test. All of them were tight.
Hope that helps. My only guess is there could be some contact problems but I'm not positive.
We will see this week when the package arrives in the mail.
Cajun Jeff :B
