enblethen wrote:
Am guessing you have a multi-function turn signal switch assembly. Have you checked for control voltage to the high beam relay? Does your turn signal lever allow for pulling up for energizing the high beams and down to lock in high beams?
The signal light lever can move 3 ways, left/right/ up.
the left/ right turn lights work normally.
the UP is supposed to cause the high beam to come on or off as required. it does nothing. high beams never come on.
I all so notice the the panel lights that operate dim bright function (dimmer) is always on when the key is on.
the light switch also operates the Over head reading light. it operates normal.
also the low beam lights are alway on when the key is on.