Onan 7500 HDKA getting code 36
Hello, Writing to see if anyone has this issue and solution. My generator run great! When it runs. The problem I am having is it shuts down after about 1 hour of driving. It will shut down after ...
Forum Discussion
The manual says:
ENGINE STOPPED FAULT—CODE NO. 36 (Engine stopped without command by controller) Corrective Action:
1. Check fuel level. (Note: The genset fuel pickup is probably higher than the vehicle engine pickup.)
2. Prime the engine fuel system by holding the control switch down in its Stop position for at least 1 minute.
3. Check the engine air filter and remove any blockage.
4. Check for mechanical damage.
By doing google searches I have many people with this problem and code. Seem to be a general code to cover several potential issues.
ENGINE STOPPED FAULT—CODE NO. 36 (Engine stopped without command by controller) Corrective Action:
1. Check fuel level. (Note: The genset fuel pickup is probably higher than the vehicle engine pickup.)
2. Prime the engine fuel system by holding the control switch down in its Stop position for at least 1 minute.
3. Check the engine air filter and remove any blockage.
4. Check for mechanical damage.
By doing google searches I have many people with this problem and code. Seem to be a general code to cover several potential issues.
