Pad under jacks
Hi all, Does anyone use pads under their jacks to prevent damage to the surface under the jacks or to prevent the jacks from sinking into soft ground? Has anyone used this brand of pads: http://...
Forum Discussion
I made my pads by glueing & screwing together two 12" x 12" exterior 3/4 plywood pcs and then treated with protectant.
These have worked well.
NOW, I am tired of carrying these around AND having to pull them out of storage (valuable space) and positioning them under the jacks.....AND cleaning them so they can be stored again...........SO.....
I'm going to permanently attach them to my jack pad so I don't have to go through the positioning exercise. A couple of stainless bolts should do the job.
Has anyone done this?
I have checked all clearances and I'm OK all around.
Please advise.
Thanks,
Paul
These have worked well.
NOW, I am tired of carrying these around AND having to pull them out of storage (valuable space) and positioning them under the jacks.....AND cleaning them so they can be stored again...........SO.....
I'm going to permanently attach them to my jack pad so I don't have to go through the positioning exercise. A couple of stainless bolts should do the job.
Has anyone done this?
I have checked all clearances and I'm OK all around.
Please advise.
Thanks,
Paul
