Another Norcold issue
Ok guys I have a Norcold 1200 series refer that recently started tripping the GFI when attempting to run on AC...(works fine on propane) I measured the voltage at the refer plug in point and have 118/...
Forum Discussion
If the thermocouple shows continuity, it's probably good. If it fails, it will show an open and the red light on the box will flash. If you get a solid red light, the problem is with the box itself. You may or may not be able to reset it with the magnet.
Norcold will replace the box for free, but will only send it to a certified tech. They will not give it to the owner.
You may want to do a little research on this. That's what I'm using now. Much better.
Norcold will replace the box for free, but will only send it to a certified tech. They will not give it to the owner.
You may want to do a little research on this. That's what I'm using now. Much better.
