Fiberclass clearcoat help.Sandpaper
I just went through the whole inside of my Newly purchased 2001 Jamboree, now I'm attempting to spruce up the outside. The finish is fading so I purchased the 3M Rubbing compound/restorer based on t...
Forum Discussion
Thanks so much.
My Neighbor who knows everything, seemed to think it was a Clear Coat applied at the Factory, it is a very thin membrane so I didnt think it was Gel Coat even though I don't even know what that is. But this stuff thats on there sure sticks like the dickens.
But my question still stands about the wet and dry, I had a sheet of 600 grit that really didn't do much so bought 400. This sanding idea came from a Boat forum.
My Neighbor who knows everything, seemed to think it was a Clear Coat applied at the Factory, it is a very thin membrane so I didnt think it was Gel Coat even though I don't even know what that is. But this stuff thats on there sure sticks like the dickens.
But my question still stands about the wet and dry, I had a sheet of 600 grit that really didn't do much so bought 400. This sanding idea came from a Boat forum.
