Forum Discussion
luvdoggiez
Nov 21, 2014Explorer
Hi there everyone,
Ok, so after finding a diagnostic manual on the net, I checked the heater rods and both had 61 ohms of resistance. Since the fuses were good and there was power to the board, the diagnostics said to replace the control board.
I got a new board through Amazon. In looking at the old board, it looks like there was a failure at the main A/C resistor. The board is scorched under the big blue resistor. My question is, for anyone who might have replaced their board, did you have the same problem and did you have any problems after that?
Thanks for the help and the insight!
Eric and Carol Anderson
Ok, so after finding a diagnostic manual on the net, I checked the heater rods and both had 61 ohms of resistance. Since the fuses were good and there was power to the board, the diagnostics said to replace the control board.
I got a new board through Amazon. In looking at the old board, it looks like there was a failure at the main A/C resistor. The board is scorched under the big blue resistor. My question is, for anyone who might have replaced their board, did you have the same problem and did you have any problems after that?
Thanks for the help and the insight!
Eric and Carol Anderson
About Motorhome Group
38,705 PostsLatest Activity: Jan 14, 2025