San-T-Flush Pre-Tank Leak

Well, I kept digging and figured out how to get access to the vacuum-breaker for the black tank flush system. So I'm adding this for anyone else that may have a Winnebago Minnie Winnie with a similar set up. To gain access do the following. 1. Score the sealant with a razor. 2. Gently pry off the plastic buttons covering the screw heads. 3. Remove 4 screws holding the shower faucet in place. 4. Disconnect the water lines from the faucet housing. 5. Reach in and find the vacuum-breaker assembly and position outside the faucet opening. The last photo is where the leak was coming from.







Hope this helps anyone that has a similar issue.