Self Contained Sewer hose on Class A
i was in bristol over the weekend and i saw a self contained tube not homemade were sewer would slide out and back in without making any connection and it was approx 3 ft long on a elbow up to the co...
Forum Discussion
ss340duster wrote:
So 6 inches held 10 ft of hose
stugpanzer wrote:
The length for me is the length of the tube, plus some up on the threaded cap area, some in the elbow and then some in the compartment. The pvc length (main run) for me was about 20" and then there is about another inch after the elbow then about 6" from the compartment opening (flange) to the connection. I fit a 10' hose in there and its quite tight.
With the elbow I'm reading over 30" -- where did you get 6"?
