Skid Wheels
Wanted to install some skid wheels on the back to stop my hitch from dragging when the rear wheels go through a dip in the road. I could not find any info on what size wheel to use. It seems to be a h...
Forum Discussion
When we bought our used C, it has the skid casters bolted to the hitch. They hung down several inches, and one was already bent to the point about half of the ball bearings were missing. One of my first tasks was to remove them..
I subsequently added air bags which helped a lot, but I still had occasions where we dragged the bottom of the hitch, so I bought a bracket and steel roller that used the hitch pin to hold it in place:
Problem is, in softer materials, it acts like an anchor - I know, I buried it twice. And it still hangs down.
We don't tow, so I came up with this nifty idea:
I made mine; here's the rest of the story from a previous post:
Tail Dragger Roller Project
I subsequently added air bags which helped a lot, but I still had occasions where we dragged the bottom of the hitch, so I bought a bracket and steel roller that used the hitch pin to hold it in place:
Problem is, in softer materials, it acts like an anchor - I know, I buried it twice. And it still hangs down.
We don't tow, so I came up with this nifty idea:
I made mine; here's the rest of the story from a previous post:
Tail Dragger Roller Project
