What did you do to your Class C MH today???

Re-trained the transmission computer . Took 15 minutes , and
no more hard downshifts ! Yea !

Removed the carburetor from my 1973 Dodge B300 Sportsman. Going to purchase a replacement this week and install it. I'll have some additional fixing to do but this is a start :)

Rudy

I'm taking 4 boys (3 grandsons and a friend) on a trip next week, so I spent the day digging out the seatbelts on the dinette and couch and verifying that they worked. Tomorrow I'll drain and refill the water tanks.

In getting it ready for the big trip this summer we have had the oil changed the awning replaced, one fuel pump and the selector valve replaced and last but not least the generator's rectifier bridge, replaced.

Hi,

Used it as a bedroom and then took it to my housekeeper for cleaning.

Earlier in the week I finished putting Smart Tiles in the Kitchen... Easy to install and looks GREAT!

We've been busy busy lately getting ours all ready to go. We installed a new shower head, a new outside light, mounted a tv, pulled out the old shag carpet and replaced it with a vinyl tile. I made all new curtains for it and we repainted the old stove top.

Put some thin cedar paneling(Menards) in the closet back walls, (2) and the (2) drawers of the 06 Aspect 26A. Measured twice and cut once (for the most part) and got the appoval of the boss'ete.(Wife) Celebrated the project with a Martini in the MH (parked in the driveway). Now ready for the three Grand daughters for a night of camping this weekend. Hope the weather shapes up.

Checked the right rear back-up light which had gone out. Discovered the bulb was good but the socket wasn't making contact. Bent the wires on the bulb and all is well. checked the other side and bent those wires too. The bulb was like an oversize 921 bulb, never seen one before.

Refinished the oak drink holder from the cab of the RV. I forgot to take a before picture, But the old finish was peeling off and there were water ring stains where the bottom of the drinks sat.