Forum Discussion
janechucknicode
Sep 29, 2017Explorer
You could do this with out a diagram,with anew 25' cable sans one end, open up the panel where it comes into the room, and where it enters, the open that end. Try tugging real hard,,,but don't pull it out.
Tight tape the new onto the old after you cut the old connector off, and start pulling .. you may want to get some wire pulling goo from an electrician which helps the slid of the wire.
I doubt if it stapled any where in the unit.
Good luck.
Tight tape the new onto the old after you cut the old connector off, and start pulling .. you may want to get some wire pulling goo from an electrician which helps the slid of the wire.
I doubt if it stapled any where in the unit.
Good luck.
About RV Must Haves
Have a product you cannot live without? Share it with the community!8,795 PostsLatest Activity: Apr 04, 2025