By-Passing TV Power Booster For Satellite

The easy way to do this is to remove the wall plate. On the back side you will see the connections labeled Cable and Antenna. Remove the coax from the Cable connection and connect it to an A/B switch (the single port). Now connect 2 coax cables to the A/B output ports and connect one right back to that Cable connection and the other will go to your satellite TV receiver. A for satellite and B or Bable (ummmm Cable). Now you ensure the power is off to the wall plate (power on gives you the OTA signal) and push the appropriate button depending upon whether you are connected to cable or satellite.