By-Passing TV Power Booster For Satellite
I have heard there is a way to re wire around the antenna power booster for satellite. My last trailer had a "loop" that would allow you to work around the power booster for satellite (although I am ...
Forum Discussion
You will have to determine how that signal gets to those TV's. The wiring will get the satellite signal to a satellite receiver located near the OTA wall plate. The receiver will likely only have an HDMI output if you want to watch HD TV. That will allow only 1 TV to receive satellite.
There are some receivers which have coax output but you will be watching SD TV on the other TV's and you will need to wire another A/B switch into that same wall plate on the To TV in an attempt to get the satellite signal to the other TVs.
There are some receivers which have coax output but you will be watching SD TV on the other TV's and you will need to wire another A/B switch into that same wall plate on the To TV in an attempt to get the satellite signal to the other TVs.
