Direct TV Setup
Can I use a slimline 3 dish with a HR 24 DVR (living room) and HR 25 HD Receiver (bedroom). The base of the LNB arm has 4 connectors, which one is used? Am I correct in my assumption that I will nee...
Forum Discussion
Neither receiver should put out voltage when set to SWM. Both receivers should put out voltage when set to multi-switch. While the PI is "rated" for 21V, it's likely that it can put out different voltages in different situations.
Both the HR21 and the HR24 will output 13V and 18V when set to multiswitch and both will output zero when set to SWM (assuming they are working correctly).
Both the HR21 and the HR24 will output 13V and 18V when set to multiswitch and both will output zero when set to SWM (assuming they are working correctly).
