king dome and dish satellite
I have a king dome hook up to dish network, for some reason I cannot get a signal on satellite 119, 110 is full power, any ideas?? thanks
Forum Discussion
Since you are getting a signal on one satellite you should be able to preform the check switch. During that routine the antenna will move between the 110 and 119 (and 129 if it's new enough) and return the proper check switch results (SW21 as mentioned above). There is a specific procedure required so be sure to check your owners manual for the procedure.
Also, as mentioned above, all of the domes are set for DirecTV from the factory (except the new Relay) and must be re-programmed for Dish Network with a factory key pad.
Also, as mentioned above, all of the domes are set for DirecTV from the factory (except the new Relay) and must be re-programmed for Dish Network with a factory key pad.
