time2roll wrote:
Just mount the inverter behind the breaker/fuse panel.
Use the main battery feed to get 12 volt power.
Use a small $50 transfer switch to power the single branch that includes the outlet you need.
No pulling wire, just make connections.
This would be good for about 400 watts max.
my breaker/fuse box is at the bottom of my entertainment center. what would I look for to find main battery feed? Would it be the wire (DC Wire, not ROMEX) going into the fuse box?
Since starting this thread, I have not gone out to the storage site to look at the fuse box, so it may be simpler than I am thinking.
