Campin LI wrote:
Here is my take.
B) Level stance: The only way to accomplish this is to apply WDH to transfer 500 lbs to the front axle. Add air to the airbags until the truck is level.
C) Stabilize the load: This is my preferred method. The way to accomplish this is to apply WDH and adjust to put 500 lbs on the front axle and keep 1000 lbs on the rear axle. Pump air into the airbags until you just see the rear of the truck rise.
.
I agree with your B and C except as I just mentioned previously, Option B is telling me the WDH isn't set up very well if this example requires air in the bags to level out the TV after the WDH is set.
