Howdy!
I recently went from a MDT 4400 International to a new Chevrolet 3500 DRW with EOM break controller. This my first time with a truck that has a OEM controller I’ve always used a Prodigy controller before. We are fulltimers and just before leaving out with our need truck our 5er was in to have new drum brakes on all three axles. When I hooked up for our first pull with this truck and the OEM controller even with the gain set at the highest level 10 I don’t seem to have much breaking. Not sure if it’s the controller or or what. Never had this problem when using our Prodigy controller.
“Happy Trails”
Chiefneon
