Ball Height Vs. Coupler Height
Greetings, I have a new truck and therefore I've had to adjust my Equalizer hitch accordingly. Basically, the new truck (3/4 ton) is much higher than the previous vehicle (1/2 ton) and so the ball...
Forum Discussion
As I recall from Equal-i-zer installation instructions, you need to get the ball down to the level of the coupler (assuming the trailer itself is leveled). Otherwise your TT is likely to be nose-high when hooked up with the bars. Especially with a 3/4 ton which will squat less than your old 1/2 ton. Nose-up trailers do not tow as well. If you try to compensate with less pressure on the bars, you will have less WD and less sway control.
