Blowing Out Lines
Was winterizing my MH today and was using air to blow out the lines. I hooked the compressor up to the MH and started winterizing before I realized the compressor was set at 50PSI. I was almost done...
Forum Discussion
Monaco Montclair wrote:
And if u miss a single drop, oops, but if the lines are full of RV antifreeze. I like that idea, just finish ed mine. Ya hooooo, a camping we will go. Now it's all happy-camping
Missing a single drop will not cause damage!! Even a 3/4 full dip will not be damaged PEX is flexible.
DW doesn't like the after taste of the antifreeze, so with the new 5er I simply blow the lines.
As to the air pressure, you could run 100 psi as long as you have the low point drains open, and have allowed the lines to drain. The system will never see the 100#, that would only be an issues if you totally closed the system with that much pressure.
:)
