Front leg will not work
When we went to unhitch our 5th wheel yesterday after getting it off the truck the front legs blew a fuze. I replaced the fuze but now it appears that one of the legs does not work. There is one mot...
Forum Discussion
Cross drive tube.......
Does it rotate when motor runs?
YES..then check if bolt has broken that attaches tube to slave drive shaft.
1/4 x 20 bolt is easy fix
No,,,,,then check if bolt has broken that attaches tube to main drive shaft
Bolts OK.
Then need to pop top (sheet metal cover on slave unit) and check if shear pin has snapped on bevel gear (one that is on drive shaft)
Does it rotate when motor runs?
YES..then check if bolt has broken that attaches tube to slave drive shaft.
1/4 x 20 bolt is easy fix
No,,,,,then check if bolt has broken that attaches tube to main drive shaft
Bolts OK.
Then need to pop top (sheet metal cover on slave unit) and check if shear pin has snapped on bevel gear (one that is on drive shaft)
