Receiver tube/hitch shank slack or play?
Has anyone ever tried to shim their TV's 2" receiver tube to eliminate some of the play when the shank is installed? I'm talking about when you slide in your hitch shank into the receiver tube and in...
Forum Discussion
Drill 2 1/2 inch holes into the receiver tube one on the top and one in the side, next get two 1 inch long 1/2inch coarse threaded nuts and bolts, put some anti seize compound on the threads and thread the nut all the way on. Next insert into the two holes and weld the nut to the receiver tube, after it cools back off the jamb bolt and insert the hitch put the pin in and tighten the bolts down, the hitch won't move again until you back off the jamb bolts.
